林丽梅（1983-），福建莆田人，凝聚态物理博士，高级实验师。近年来一直从事新型薄膜太阳电池的研究，在国际重要期刊Adv. Funct. Mater.、Nano Energy、Chem. Eng. J.、ACS Sustainable Chem. Eng、Small等刊物上发表SCI论文20余篇，授权中国发明专利2项。主持国家自然科学青年项目和福建省自然科学基金高校产学合作项目、面上项目等。
研究领域：
1.新型无机薄膜太阳电池；
2.铜铟镓硒薄膜太阳电池；
代表论文：
[
[1] J. Huang, J.C. Zhang, J.N. Bao, W.Q. Huang, H. Li, L.M. Lin*, Z.P. Huang, S.Y. Chen, G.L. Chen*. Bulk and interface-engineered Zn(O,S)/SnSe heterojunctions via SCAPS-1D simulation: Toward 22.46% efficient ecofriendly photovoltaics. ACS Sustainable Chem. Eng. 2025, 13, 19246−19260.
[2] H. Li, J.N. Bao, J.R. Cai, Y.S. Xia, L.J. Liu, G. Huang, L.M. Lin*, Z.P. Huang, G.L. Chen*. Solution-processed multivalent molybdenum oxide tailoring band alignment for efficient Sb2S3 solar cells. Small 2025, 21, e07731.
[3] Z.P. Huang, J. Huang, Z.H. Huang, Y.X. Chen, H. Li, L.M. Lin*, Z.G. Huang*, S.-Y. Chen, G.L. Chen*. Hot pressing-induced selenium solar cells and the SCAPS simulation for its indoor photovoltaics application. J. Alloy. Compd. 2025, 1012, 178473.
[4] L.M. Lin, F.Y. Wu*, Z.P. Huang, L.Q. Yao, H. Li, R.Y. Liao, A.C. Chen*, J.M. Li*, G.L. Chen*. Evaporation of eco-friendly MoS2 nanofilm for interface engineering in carbon-based Sb2(S,Se)3 solar cell. ACS Appllied Energy Materials 2023, 6, 10415-10423.
[5] L.M. Lin*, R. Da, C.Q. Zheng, R.B. Zeng J.D. Ding. Substrate structured bournonite CuPbSbS3 thin film solar cells. Crystals, 2023, 13, 1256.
[6] F.Y. Wu, Y.Q. zhao, L.Q. Yao, H. Li, Z.P. Huang, L.M. Lin*, Y.P. Ma, S.Y. Chen, J.M. Li*, G.L. Chen. Manipulating back contact enables over 8%-efficient carbon-based Sb2(S,Se)3 solar cells. Chemical Engineering Journal, 2022, 440, 135872.
[7] L.M. Lin, G.L. Chen*, L.Q. Yao, Z.P. Huang, H. Li, F.Y. Wu, W.W. Lin, Y. Mao, Z.G. Huang*. Antimony loss and composition-dependent phase evolution of CuSbS2 absorber using oxides nanoparticles ink. Materials Science in Semiconductor Processing, 2021, 133, 105944.
[8] L.M. Lin*, J.Y. Liu, J. Lv, S.J. Shen, X.P. Wu, D.C. Wu, Y. Qu, W.F. Zheng, F.C. Lai. Correlation between native defects and morphological, structural and optical properties of ZnO nanostructures. J. Alloy. Compd. 2017, 695, 1523-1527.
[9] L.Q. Yao, M.H. Lai, L.M. Lin, D. Wei, Z.G. Huang, S.Y. Chen, G.L. Chen*, Cation exchange-assisted hot injection for PbSe nanocrystalline structures anchored to Sb2S3: Constructing a deeply buried back interface for highly efficient solar cells. ACS Photonics 2024, 11, 2805-2814.
[10] L.Q. Yao, L.M. Lin, Z.P. Huang, Y. Mao, H. Li, W.W. Lin, S.Y. Chen, Z.G. Huang, J.M. Li, G.L. Chen*. A liquid medium annealing strategy for highly [041]/[141]-oriented planar antimony sulfide solar cells with 7.23% efficiency. Nano Energy 2023, 106, 108064.
[11] H. Li, L.M. Lin, L.Q. Yao, F.Y. Wu, D. Wei, G.L. Liu, Z.G. Huang, S.Y. Chen*, J.M. Li*, G.L. Chen*. High-efficiency Sb2(S,Se)3 solar cells with new hole transport layer-free back architecture via 2D titanium-carbide MXene. Adv. Funct. Mater. 2021, 32, 2110335.
[12] L.Q. Yao, L.M. Lin, H. Liu, F.Y. Wu, J.M. Li*, S.Y. Chen, Z.G. Huang, G.L. Chen*. Front and back contact engineering for high-efficient and low-cost hydrothermal derived Sb2(S,Se)3 solar cells by using FTO/SnO2 and carbon. J. Mater. Sci. Technol. 2020, 58, 130-137.
科研项目：
主持国家自然科学基金青年项目（62204041），福建省自然科学基金高校产学合作项目项目（2025H6009）和面上项目（2013J01174）等。
已授权发明专利：
1. 陈桂林；李虎；林丽梅；黄志高；一种气固反应制备太阳能电池吸收层四硫化锑三铜薄膜的方法，中国发明专利，专利号：ZL 2020 1 1328649.8。
2. 李辉；陈桂林；林丽梅；一种CuGaO2太阳能电池的制备方法，中国发明专利，专利号：ZL 2024 1 0165047.7。
1. 赖发春；程正勤；黄志高；林丽梅；郑卫峰；瞿燕；吴小春；高质量透明导电薄膜制备及其应用研究福建省科技进步二等奖，2011-01-15。
2. 赖发春；黄志高；林丽梅；钟克华；郑卫峰；新型光电子材料的设计、制备及其应用，福建省自然科学奖三等奖，2019-09-01。
电子邮箱：linlm@fjnu.edu.cn
